| ||||||
 | ||||||
PRESSURE TANK STEEL DIN EN 10028-3 |
 |
 | |
| This list shows you weld able fine grain structural steel types that are annealed the normal way. |
| DIN-Code |
Material no. | Certificate | Plate thickness in mm |
Width in mm | Length in mm | |
| P 275 NH |
1.0487 | 3.1B acc. to EN 10204 |
5 - 130 | 1000 - 4000 | up to | 16000 |
| P 275 NL1 |
1.0488 | 3.1B acc. to EN 10204 | 5 - 130 | 1000 - 4000 | up to | 16000 |
| P 275 NL2 |
1.1104 | 3.1B acc. to EN 10204 | 5 - 130 | 1000 - 4000 | up to | 16000 |
| P 355 N |
1.0562 | 3.1A TÜV bzw. 3.1B acc. to EN 10204 AD 2000 W1/W10 | 3 - 220 | 1000 - 4000 | up to | 16000 |
| P 355 NH |
1.0565 | 3.1A TÜV bzw. 3.1B acc. to EN 10204 AD 2000 W1/W10 | 3 - 220 | 1000 - 4000 | up to | 16000 |
| P 355 NL1 |
1.0566 | 3.1A TÜV bzw. 3.1B acc. to EN 10204 AD 2000 W1/W10 | 3 - 220 | 1000 - 4000 | up to | 16000 |
| P 355 NL2 |
1.1106 | 3.1A TÜV bzw. 3.1B acc. to EN 10204 AD 2000 W1/W10 | 3 - 220 | 1000 - 4000 | up to | 16000 |
| P 460 NH |
1.8935 | 3.1A TÜV bzw. 3.1B acc. to EN 10204 AD 2000 W1/W10 | 4 - 180 | 1000 - 3000 | up to | 14000 |
| P 460 NL1 |
1.8915 | 3.1A TÜV bzw. 3.1B acc. to EN 10204 AD 2000 W1/W10 | 4 - 180 | 1000 - 3000 | up to | 14000 |
| P 460 NL2 |
1.8918 | 3.1A TÜV bzw. 3.1B acc. to EN 10204 AD 2000 W1/W10 | 4 - 180 | 1000 - 3000 | up to | 14000 |
back
on top
